Garage Doors
Garage doors can be painted in any choice of colour. The finish coat is equivalent to modern day powder coat.
All the areas surrounding the garage doors will always be covered and protected as well as the ground surface.
There are many styles of garage doors; some have Perspex windows on the top no design too difficult.
Occasionally some doors develop corrosion in the top area, we can ensure all these surfaces will be cleaned back and treated accordingly. All surfaces will need to scuffed back and primed to ensure a good quality finish.
Pool Fences
Major issues when spraying old pool fences depends on the condition of the pool fence, a decision is made once the fence has been inspected directly.
Most pool fences end up with a reaction due to the salt water in pools. The beauty of the finish applied, makes the paint more resistant to the salt water conditions as well as insuring a sufficient amount of microns (thickness of paint) is applied to the pool fence.
We are able to re-spray over old powder coated fences, raw galvanized, aluminium or any other metal surface.
We are able to re-spray over old powder coated fences, raw galvanized, aluminium or any other metal surface.
Shop Fronts
When it comes to shop front renovations this process is very efficient, allowing you to bring your shop front into the present modern day décor without having to remove or replace your windows.
Overtime a lot of dust, grime and pollution can settle and stain the aluminium windows this requires for the aluminium to be very roughly sanded back, the glossier the coat the more sanding. This allows the paint a better bonding to the aluminium surfaces.
A thorough cleaning wash down with prep wash and then the added coats of primer and then the application of the finish polyurethane paint will ensure a quality finish this is all applied electrostatically.
Decorative Handrails
Manufacturers of decorative handrails usually find the installing of the staircase requires welding to be done on site and thus prefer to have the re-spraying done on site once the install is completed.
The other issue is the transportation, working with very heavy steel frames and to transport these frames to the powder coaters and then picking them up from the powder coaters and then to the sight is time consuming and costly to the customer.
Many installs that are placed from ground floor to first level whether in an office or a home will have an epoxy zinc coating applied to the bare metal once the metal has been cleaned thoroughly and then a finish coat of your choice of colour is applied ensuring a durable and lasting finish.
Aluminium Windows
Most interior designers and architects that are aware of this process request for the internal office perimeter windows to be painted in a white color during the renovation process to give a clean coherent look.
When it comes to renovations to your residential property this process is very efficient, allowing you to bring your home into the present modern day décor without having to remove or replace your windows.
This process has become popular in renovations to old windows in the residential sector.
We can re-spray any style of window, sliding, double hung, wind-out etc
Lift Doors
During any renovation in city office blocks each floor once refurbished requires the lift doors to be re-sprayed and sometimes the internals of the lifts are included.
This work is normally carried out after hours.
A common issue with lift doors is the badly chipped edges of the side panels and requires feathering out to achieve a quality finish.
The spray-painting technique used eliminates any overspray problems. The fine coat of paint applied is hard wearing.
The lift doors can be sprayed in single colour, two-tone and even in a metallic finish, we have even spayed over stainless steel finish.
